home *** CD-ROM | disk | FTP | other *** search
- T H E R I C H A R D W E B S T E R S Y S T E M
- G E T T I N G S T A R T E D
- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- QUICK START:
- To run the program from a DOS prompt, enter: WEBSTER
- To read the manual, press <F1>
- while running the program.
-
- REVIEWERS: If you intend to review this software for publication, please
- contact us to make sure you have the most recent version and that the
- ordering information supplied to your readers will be accurate. We would
- appreciate receiving a tearsheet or copy of any published reviews. Thank
- you!
-
- ALWAYS MAKE A BACKUP COPY of the original disk before you do anything.
- (See the DISKCOPY command in your DOS manual.) Put the original in a safe
- place, and use the copy as the master disk when you install the program.
- Note that in all of the following examples, if your drive letters or
- directory names are different, you can simply use the same command, but
- with your actual drive letter and directory name. For example, we refer to
- the floppy drives as drive A and drive B. If yours are really called drive
- D and drive E, then use D and E instead of A and B. In our hard disk
- example, the subdirectory is called WEBSTER. But you can name it something
- else. For example, if you name it WEST, just use WEST in the command
- instead of WEBSTER.
- The following instructions assume the files on your disk are NOT
- archived. If you have received the files in archived format, refer to the
- installation instructions that came with your disk.
-
- INSTALLING TO A HARD DISK: The first thing you need to do is create a
- subdirectory on the hard disk. (If the subdirectory has already been
- created, you don't have to create it now.) For example, if you decide to
- name the subdirectory WEBSTER, you would start at your C> prompt, and use
- the following sequence of commands:
-
- CD\
- MD WEBSTER
- CD \WEBSTER
-
- Now put the master disk in the A drive and enter this command:
-
- COPY A:*.*
-
- You should see all the files being copied. When the copying is finished,
- you are ready to run the program.
-
- INSTALLING TO A FLOPPY DISK WHEN YOU HAVE TWO FLOPPY DRIVES: Put the
- master disk in drive A. Put a new, formatted disk in drive B. Enter this
- command:
-
- COPY A:*.* B:
-
- You should see the files being copied to the disk in the B drive. When
- all the files have been copied, the B disk is your working disk. You can
- move the B disk to the A drive and use it there if you prefer.
- For greatest efficiency and maximum storage capacity, we urge you to
- install the software to your hard disk.
-
- INSTALLING TO A FLOPPY DISK WHEN YOU HAVE ONE FLOPPY DRIVE: Put the
- master disk in drive A. Have a new disk ready. Enter this command:
-
- DISKCOPY A: B:
-
- The computer will display messages telling you when to put the "source
- disk" or the "target disk" into the drive. The "source disk" is your master
- disk. The "target disk" is your new disk. When all the files have been
- copied, the "target" disk is your working disk.
- For greatest efficiency and maximum storage capacity, we urge you to
- install the software to your hard disk.
-
- NEED MORE SPACE? If you are running programs on floppy disks you may not
- have enough disk space for the data files created by the program. You can
- remove the documentation files, which the program does not need, from your
- working disk. However, these files contain important information which you
- will need for reference, so do not delete them from your master disk. To
- delete the documentation files, put the working disk in the A drive and
- enter these commands:
-
- DEL A:*.TXT
- DEL A:*.DOC
-
- The documentation files must be included with copies of the program that
- are distributed to others.
-
- PROGRAM FILES: Program files can be identified by the extension EXE or
- COM after the file name. To run the program, simply type its name. For
- example, if you have a program named WEBSTER.EXE, type WEBSTER and press
- <ENTER>.
-
- DOCUMENTATION AND INSTRUCTIONS: All features of the program are
- documented in the <F1> manual.
- Files which have the DOC or TXT extension are ASCII format files (also
- called DOS Text files) which can be viewed or printed using DOS commands.
- For example, if you have a typical setup, you can print a document called
- WAURINFO.TXT using this command: TYPE WAURINFO.TXT > PRN
- To view this file on screen, you would enter: TYPE WAURINFO.TXT | MORE
- (Successful use of MORE assumes that the correct DOS files are in your
- path. If this is not the case, you can simply use TYPE WAURINFO.TXT, but the
- file may scroll up out of view.)
- You can also view and print this kind of file with text viewing
- utilities, and with most word processors, using "ASCII", "DOS Text" or
- "Non-document" format.
-
- CHANGES AND UPDATES: Sometimes changes are made in a program after the
- manual is completed. Information about such changes will appear on disk in
- a text file called UPDATE.TXT. If this file appears on your disk, you
- should read it to get the latest important information about the software.
-
- NEW VERSIONS: Sometimes a new version of a program will ask permission
- to update your data files. Do not answer "yes" unless you have already made
- a backup copy of your data. Don't copy the backed-up data back into the
- directory after the files have been updated. This backup is simply
- insurance against data damage or loss. You should make backups regularly.
-
- BE SMART! Before installing new versions of any software, make backups
- of all the old files. This protects you in case of an error during the
- installation/update process. Remember that power surges, hardware failure,
- and user errors can all lead to data loss or damage. Make backups of your
- data on a regular basis. If you wonder how often you need to back up your
- word processing documents, mailing lists, spreadsheets, etc., ask yourself,
- "How many days worth of work can I afford to lose?" We recommend that you
- use a system of three or more sets of backup disks which you rotate on a
- daily basis. That way, if something unfortunate happens to one set of
- backups, you will have another set available. A few minutes spent making
- daily backups can save you hours of heartbreaking work trying to recreate
- lost data.
-
- BAD DISK? It seems that in hot weather we sometimes get complaints about
- "bad" or unreadable disks. Floppy disks are susceptible to heat, moisture
- and magnetism. A disk that sits all day in a hot mailbox or truck where
- temperatures exceed 100 degrees is likely to be damaged. Disks which have
- been exposed to magnetism may become unreadable.
- Before assuming a disk is bad, try it on another computer. It may be
- that your computer's drive heads are dirty or slightly misaligned. Suspect
- this if you often get disk error messages with different disks. An
- inexpensive head cleaning kit may help solve the problem.
- With 5.25" disks, sometimes the round disk gets trapped inside its
- square casing and generates an error because it can't rotate freely.
- Remove the disk from the drive and tap each of the four edges sharply on
- the surface of your desk. This may loosen the disk. Try reading the disk
- again.
- With 3.5" disks, the sliding plate may not be sliding open when the disk
- is placed inside the drive. Gently slide the plate back and forth until it
- feels looser, being careful not to touch the disk media inside. Try reading
- the disk again. If the plate will not slide, or if it appears to be bent,
- do not place it inside the drive. Instead, you can simply remove the plate,
- which protects the disk but is not required for us.
- Several popular utility packages have features that can sometimes
- revive unreadable disks.
- In any case, if we sent you an unreadable disk, we will be happy to
- replace it with a fresh copy of the same program. IF YOU RECEIVED A BAD
- DISK FROM A VENDOR, THE VENDOR SHOULD REPLACE IT.
-
- SUPPORT: This software has been thoroughly tested, and complete
- instructions are contained in the user's manual.
- For fast, reliable answers to your questions, visit the R.K. West
- section on CompuServe. GO RKWEST. You'll also be able to download
- 30-day evaluation versions of our new products in Library 9.
- Please note that we do not intend to update this product further. If
- you found it useful or enjoyable, please feel free to keep it. If you
- did not like it, simply delete it from your system.
- Visit our WWW home page at http://members.aol.com/rkwest
-
- SOFTWARE LICENSE AND WARRANTY INFORMATION: See the file VENDINFO.DIZ.
- If VENDINFO.DIZ is missing or damaged, or if you do not understand it,
- contact the author for complete information.
-
- To receive a free catalog of unusual software, please send a self-
- addressed, stamped envelope.
-
- If you liked this program, you will love FORTUNE TELLER PLUS, which has
- eleven different methods of divination: Three card methods, two numerology
- methods, runes, auras, Astro-Mates, dice, geomancy, and "Instant Oracle" --
- plus an ESP test!
- To: R.K. West Consulting FORTUNE TELLER PLUS ORDER FORM
- PO Box 8059
- Mission Hills CA 91346, USA
-
- Your Name: ________________________________________________ please
- print
- Address: __________________________________________________ clearly
-
- __________________________________________________
-
- __________________________________________________
-
- Phone: __________________________________________________
-
- _____ FORTUNE TELLER PLUS @ $29.00 each: ___________________
-
- _____ Shipping outside the US, Canada $3, others $6 ___________________
-
- Disk Size: ___ 3.5 ___ 5.25 TOTAL ENCLOSED: ___________________
- 3.5" is best
-
- Free Bonus Program! Pick ONE:
-
- ___ Cliche Finder ___ Curses! ___ Practical Jokes ___ Shareware
- (If not available at time of order, another free program will be sent.)
-
- All prices are in U.S. dollars, checks drawn on and payable through a U.S.
- bank. You may register by credit card through Public (Software) Library. In
- the USA call 800-242-4775. Others, call 713-524-6394. These numbers are for
- orders only. You can Fax a credit card order to PsL at 713-524-6398; or
- mail it to: PSL, P.O. Box 35705, Houston TX 77235; or order on CompuServe from
- 71355,470. Visa, MasterCard, Discover, American Express. If ordering by
- credit card use your name EXACTLY as shown on the card. Please do not mail
- credit card orders to R.K. West (and do not mail checks to PSL).
-
- Tell us where you found this program! __________________________________
-
- ______________________________________________________________________
-
- Important: If you purchased this disk from a rack, bin, shelf or package in a
- retail store, grocery, airport, bookshop, etc., or found it on
- CD-ROM, please include the company name or brand-name logo from the
- disk package or label, and other information, such as address and
- phone, identifying the company that actually produced the disk.
-
- ______________________________________________________________________
-
- ______________________________________________________________________
-
- ______________________________________________________________________
-
- What are your comments about WEBSTER? (Use other side if needed)
-